{"id":3522,"date":"2025-09-02T20:32:24","date_gmt":"2025-09-02T12:32:24","guid":{"rendered":"https:\/\/taichungbro.com\/?p=3522"},"modified":"2025-10-02T21:14:03","modified_gmt":"2025-10-02T13:14:03","slug":"iso-9227","status":"publish","type":"post","link":"https:\/\/www.taichungbro.com\/en\/2025\/09\/02\/iso-9227\/","title":{"rendered":"What is ISO 9227 salt spray test? Master the international standard and key applications of corrosion assessment in one go."},"content":{"rendered":"<hr class=\"wp-block-separator has-alpha-channel-opacity is-style-wide\"\/>\n\n\n\n<div class=\"wp-block-rank-math-toc-block\" id=\"rank-math-toc\"><h2>Table of Content<\/h2><nav><ul><li class=\"\"><a href=\"#\u9e7d\u9727\u6e2c\u8a66\u7684\u79d1\u5b78\u539f\u7406\uff1a\u52a0\u901f\u8150\u8755\u6a21\u64ec\">The scientific principle of salt spray testing: accelerated corrosion simulation<\/a><\/li><li class=\"\"><a href=\"#iso-9227-\u4e09\u5927\u8a66\u9a57\u578b\u5f0f\uff1anss\u3001aass\u3001cass-\u689d\u4ef6\u6bd4\u4e00\u6bd4\">Comparison of the three test types in ISO 9227: NSS, AASS, and CASS<\/a><\/li><li class=\"\"><a href=\"#\u5224\u8b80\u8a66\u9a57\u7d50\u679c\uff1a\u8a55\u7d1a\u3001\u5931\u6548\u6a21\u5f0f\u8207\u5e38\u898b\u76f2\u9ede\">Interpreting Test Results: Rating, Failure Modes, and Common Blind Spots<\/a><\/li><li class=\"\"><a href=\"#\u61c9\u7528\u5be6\u4f8b\uff1a\u6c7d\u8eca\u96f6\u7d44\u4ef6\u8207\u96fb\u5b50\u5916\u6bbc\u7684\u9632\u8150\u7b56\u7565\">Application Example: Corrosion Protection Strategies for Automotive Components and Electronic Housings<\/a><\/li><li class=\"\"><a href=\"#\u7d50\u8a9e\">Conclusion<\/a><\/li><\/ul><\/nav><\/div>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity is-style-wide\"\/>\n\n\n\n<p class=\"wp-block-paragraph\">Metal components operating in humid, hot, and saline environments may corrode and fail within a short period if they lack proper protection. To quickly predict the corrosion resistance of coatings or materials in the laboratory, the industry commonly employs...<strong>ISO 9227 Salt Spray Test<\/strong>This standard simulates long-term service conditions using a controlled salt spray environment, allowing for the observation of corrosion behavior on metal surfaces that can last for months or even years over tens to hundreds of hours. This article will explain the scientific principles of ISO 9227, the differences between the three test types, the methods for interpreting results, and its practical applications in the automotive and electronics industries, helping engineers get started quickly and avoid common pitfalls.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\u9e7d\u9727\u6e2c\u8a66\u7684\u79d1\u5b78\u539f\u7406\uff1a\u52a0\u901f\u8150\u8755\u6a21\u64ec\">The scientific principle of salt spray testing: accelerated corrosion simulation<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Salt spray testing essentially exposes the specimen to a fine sodium chloride (NaCl) aerosol, simultaneously exposing the metal to a salt film, oxygen, and acidic\/alkaline substances, inducing electrochemical corrosion reactions. Chloride ions can penetrate the protective film, accelerating anodic dissolution; water molecules and oxygen maintain the cathodic reaction, forming hydroxides or oxides. ISO 9227 defines methods to enhance corrosion rates as follows:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>constant temperature control<\/strong>\u2014The NSS test chamber is maintained at 35 \u00b0C, while the AASS\/CASS test chamber is increased to 50 \u00b0C. For every 10 \u00b0C increase in temperature, the corrosion rate increases by approximately 1.5\u20132 times.<\/li>\n\n\n\n<li><strong>Stable salt concentration<\/strong>\u20145 %(m\/m) NaCl solution provides high chloride ion activity; the addition of acetic acid or copper chloride lowers the pH, generates complex coordination ions, and promotes pit formation.<\/li>\n\n\n\n<li><strong>Continuous saturation atomization<\/strong>\u2014 Compressed air is heated to near the chamber temperature by a saturation tower to ensure that the salt spray particle size is between 1\u201310 \u00b5m, so as to obtain a uniform settling rate (1\u20132 mL h\u207b\u00b9 80 cm\u00b2).<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\">Through these settings, the experiment can induce typical failure morphologies such as &quot;white rust&quot; (ZnCl\u2082\u00b74Zn(OH)\u2082) or &quot;red rust&quot; (Fe\u2082O\u2083) in a short time, allowing engineers to compare the corrosion resistance performance of different coatings or alloy formulations in the early stages of product design.<\/p>\n\n\n\n<div style=\"height:var(--wp--preset--spacing--30)\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity is-style-wide\"\/>\n\n\n\n<h5 class=\"wp-block-heading has-text-align-center\" id=\"\u60f3\u4e86\u89e3\u6709\u95dc\u7ba1\u87ba\u7d0b\u3001\u76f4\u87ba\u7d0b\u3001\u9310\u87ba\u7d0b\u3001\u5c3a\u5bf8\u8868\u793a\u3001\u82f1\u5236\u7ba1\u87ba\u7d0b\u3001\u516c\u5236\u7ba1\u87ba\u7d0b\u7684\u77e5\u8b58\u55ce\uff1f-\u5ef6\u4f38\u95b1\u8b80\uff1a\u300a\u7ba1\u87ba\u7d0b\u767e\u767e\u7a2e-\u4f60\u90fd\u8a8d\u8b58\u55ce-\u300b\">Want to learn about noise measurement, standards, dBA, and dBC? <br>Further Reading :<a href=\"https:\/\/www.taichungbro.com\/en\/2025\/04\/06\/noise-measuring\/\" data-type=\"link\" data-id=\"https:\/\/taichungbro.com\/2023\/10\/28\/screw\/\" target=\"_blank\" rel=\"noopener\">The Standards and Differences Between Three Types of Noise Measurement<\/a><\/h5>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity is-style-wide\"\/>\n\n\n\n<div style=\"height:11px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"iso-9227-\u4e09\u5927\u8a66\u9a57\u578b\u5f0f\uff1anss\u3001aass\u3001cass-\u689d\u4ef6\u6bd4\u4e00\u6bd4\">Comparison of the three test types in ISO 9227: NSS, AASS, and CASS<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The table below summarizes the three most commonly used salt spray test conditions according to ISO 9227:2017, making it convenient for engineers to refer to the table and set them:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>experimental type<\/th><th>Purpose and common targets<\/th><th>NaCl concentration<\/th><th>Additives and pH (25 \u00b0C)<\/th><th>Test temperature<\/th><th>Typical cycle<\/th><\/tr><\/thead><tbody><tr><td>NSS (Neutral Salt Spray)<\/td><td>Zinc coating, stainless steel, aluminum alloy<\/td><td>5 %<\/td><td>None; 6.5\u20137.2<\/td><td>35 \u00b0C<\/td><td>24\u2013240 h<\/td><\/tr><tr><td>AASS (Acetic Acid Salt Spray)<\/td><td>Aluminum anodized parts, decorative electroplating<\/td><td>5 %<\/td><td>Glacial acetic acid; 3.1\u20133.3<\/td><td>50 \u00b0C<\/td><td>8\u201396 h<\/td><\/tr><tr><td>CASS (Copper-Accelerated AASS)<\/td><td>Nickel\/chromium multilayer electroplating, automotive trim parts<\/td><td>5 % + 0.26 g L\u207b\u00b9 CuCl\u2082<\/td><td>Glacial acetic acid; 3.1\u20133.3<\/td><td>50 \u00b0C<\/td><td>4\u201348 h<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Engineers should select appropriate test types based on the product&#039;s service environment and surface protection mechanism. For example, zinc-plated screws should be tested using NSS to observe the formation of white rust; anodized aluminum casings should be tested using AASS to assess the fading of the dye layer; and decorative three-layer electroplated trims should be tested using the most stringent CASS to quickly examine the potential risk of red rust caused by the porosity of the nickel plating.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\u5224\u8b80\u8a66\u9a57\u7d50\u679c\uff1a\u8a55\u7d1a\u3001\u5931\u6548\u6a21\u5f0f\u8207\u5e38\u898b\u76f2\u9ede\">Interpreting Test Results: Rating, Failure Modes, and Common Blind Spots<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">ISO 9227 only specifies the test conditions and does not define the acceptance criteria; most industries refer to ISO 10289, ASTM B537, or their own defined standards for evaluation. For example, the automotive industry often uses &quot;red rust &lt;1 % area over 240 h NSS&quot; as the benchmark for whether a coating passes inspection. When interpreting these standards in practice, please note:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Area rating<\/strong>The percentage of corrosion area is represented by a score of 0\u201310, with higher numbers indicating less corrosion.<\/li>\n\n\n\n<li><strong>Pit density<\/strong>For aluminum or nickel plating, it is necessary to observe the depth of localized corrosion pits and avoid only looking at surface discoloration.<\/li>\n\n\n\n<li><strong>Accelerator Myth<\/strong>Salt spray is not a linear microcosm of the real environment; the acceleration coefficients of different coating mechanisms (sacrificial anode vs. isolation barrier) can differ by more than 10 times, and must be cross-validated by cyclic corrosion (CCT) or outdoor exposure tests.<\/li>\n\n\n\n<li><strong>Sample placement angle<\/strong>ISO recommends 20\u00b0 \u00b1 5\u00b0. If the angle is off or the carrier material interacts with the specimen as a galvanometer, the reproducibility of the results will be affected.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Through rigorous statistical design and cross-validation, the risk of &quot;over-optimizing salt spray while ignoring real-world service&quot; can be reduced, ensuring that the product maintains the expected quality throughout its entire lifecycle.<\/p>\n\n\n\n<div style=\"height:var(--wp--preset--spacing--30)\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity is-style-wide\"\/>\n\n\n\n<h5 class=\"wp-block-heading has-text-align-center\" id=\"\u60f3\u4e86\u89e3\u6709\u95dc\u7ba1\u87ba\u7d0b\u3001\u76f4\u87ba\u7d0b\u3001\u9310\u87ba\u7d0b\u3001\u5c3a\u5bf8\u8868\u793a\u3001\u82f1\u5236\u7ba1\u87ba\u7d0b\u3001\u516c\u5236\u7ba1\u87ba\u7d0b\u7684\u77e5\u8b58\u55ce\uff1f-\u5ef6\u4f38\u95b1\u8b80\uff1a\u300a\u7ba1\u87ba\u7d0b\u767e\u767e\u7a2e-\u4f60\u90fd\u8a8d\u8b58\u55ce-\u300b\">Want to learn about Shore hardness, Shore scale hardness, and soft material hardness? <br>Further Reading :<a href=\"https:\/\/www.taichungbro.com\/en\/\" data-type=\"link\" data-id=\"https:\/\/taichungbro.com\/2023\/10\/28\/screw\/\" target=\"_blank\" rel=\"noopener\">How soft is this material? A brief discussion of Shore hardness.<\/a><\/h5>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity is-style-wide\"\/>\n\n\n\n<div style=\"height:11px\" aria-hidden=\"true\" class=\"wp-block-spacer\"><\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\u61c9\u7528\u5be6\u4f8b\uff1a\u6c7d\u8eca\u96f6\u7d44\u4ef6\u8207\u96fb\u5b50\u5916\u6bbc\u7684\u9632\u8150\u7b56\u7565\">Application Example: Corrosion Protection Strategies for Automotive Components and Electronic Housings<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Taking automotive wheel rims as an example, a typical three-layer structure includes an aluminum substrate + an oxide film + an organic coating. The development team required a white rust area of &lt;2 % under 500 h NSS and no blistering under 48 h CASS. Based on salt spray results:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Oxide film thickness<\/strong>The aperture needs to be increased to 15 \u00b5m or more, and sealing treatment should be used to reduce chloride ion penetration.<\/li>\n\n\n\n<li><strong>Organic coating<\/strong>Adding a silane coupling agent improves coating-substrate interface adhesion and reduces etching and peeling rates.<\/li>\n\n\n\n<li><strong>fast-setting primer<\/strong>By utilizing a high Zn powder content, the aluminum substrate is protected by a sacrificial anode in the early stages, thus delaying the spread of corrosion.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">In the development of aluminum die-cast housings for 5G outdoor base stations, the customer required no red rust to form after 1,000 hours of NSS (Non-Salt Spray) treatment. The team replaced ordinary polyester powder coating with a polyurethane\/fluorine dual-layer coating and changed the pre-baking treatment to zirconium-based chromium-free formation to reduce cracking at the interfaces. Ultimately, the salt spray life was increased by 4 times, and the field maintenance cycle was extended from 5 years to more than 10 years.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\u7d50\u8a9e\">Conclusion<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">ISO 9227 salt spray testing has become the most widely used accelerated corrosion assessment method globally due to its high reproducibility and ease of operation. By understanding the differences in conditions among the three test types\u2014NSS, AASS, and CASS\u2014and correctly interpreting ratings and failure morphologies, engineers can make precise adjustments to coatings, alloy compositions, or pretreatments early in the R&amp;D process. In conclusion, while salt spray testing cannot completely replace outdoor exposure, combining it with cyclic corrosion and field data allows for the establishment of a more comprehensive corrosion prevention strategy, ensuring that products maintain high reliability and excellent quality even in harsh environments.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>\u5728\u6fd5\u71b1\u3001\u542b\u9e7d\u74b0\u5883\u4e0b\u904b\u884c\u7684\u91d1\u5c6c\u4ef6\u82e5\u7f3a\u4e4f\u9069\u7576\u9632\u8b77\uff0c\u77ed\u6642\u9593\u5167\u5c31\u53ef\u80fd\u92b9\u8755\u5931\u6548\u3002\u70ba\u4e86\u5728\u5be6\u9a57\u5ba4\u5167\u5feb\u901f\u9810\u6e2c\u5857\u5c64\u6216\u6750\u6599\u7684\u6297\u8150\u8755 [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":3523,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[45],"tags":[202,122,65,276],"class_list":["post-3522","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industrial-knowledge","tag-202","tag-122","tag-mechanical","tag-276"],"acf":[],"_links":{"self":[{"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/posts\/3522","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/comments?post=3522"}],"version-history":[{"count":1,"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/posts\/3522\/revisions"}],"predecessor-version":[{"id":3592,"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/posts\/3522\/revisions\/3592"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/media\/3523"}],"wp:attachment":[{"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/media?parent=3522"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/categories?post=3522"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.taichungbro.com\/en\/wp-json\/wp\/v2\/tags?post=3522"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}